The Original SoftSpring: The Softest Air Valve Spring Available!
Simply the best modification you can make to your Iwata airbrush.
Stock air valve springs have too much tension. Replacing the original spring with a new BLAIR SoftSpring will make it much easier to control, as well as reduce finger fatigue.
We are the original SoftSpring manufacturers, and the only source that replicates the exact tolerances of Dru Blair's original personally customized Iwata CM-SB, which he began developing in the 1980's. This air valve spring is softer than any other spring available. Remember that you get what you pay for, so beware of cheap imitations.
Our BLAIR SoftSpring, air valve replacement spring, for Iwata airbrushes was designed for the Iwata Custom Micron B/SB models. Since its development it has proven effective in virtually all models of Iwata airbrushes.
The BLAIR SoftSpring makes the downward pressure on your airbrush trigger (Main Lever) nearly effortless. This is good news because it reduces tension and fatigue that so often limits the artist’s control of the airbrush, especially when attempting fine details. When coupled with a side feed airbrush such as the Iwata CM-SB your BLAIR SoftSpring will facilitate the hand position that Dru Blair uses and recommends for the highest level of airbrush control.
In addition to your BLAIR SoftSpring with the Deluxe Set we include a set of locking tweezers to make installation a breeze and as an added bonus we will ship your SoftSpring in a keepsake metal capsule (Colors very - but if you have a preference let us know and we will attempt to honor your request.)
View Installation instructions on YouTube:
Super Lube Warning!
Airbrush Super Lube (the blue stuff, in a tube, that sometimes comes with new airbrushes) should be avoided. Use of this product often leaves a sticky residue. If used around the trigger pin/air valve you may have to replace the O-ring.
While the original air valve spring may exert enough force to compensate and push through the gumminess your new SoftSpring is not designed to work under such conditions. The extra force this would require would negate the whole idea of lessening the spring tension in the first place.
A symptom of this build up is that it may create enough additional friction as to prevent the trigger from returning to the air off position once your new SoftSpring is installed. We have found cleaning the O-ring to offer only temporary relief sometimes days other times only minutes. Replacement of the O-ring is the only way to eliminate the buildup.
Australian & Canadian Customers please contact our distributor, as we do not ship this product to your location.
Maple Airbrush Supplies
Text or Call: 780 909 2143